The ME passes the parameters within GET INPUT command to the external application by means of the unsolicited result code E2STKI. The external application sends AT*E2STKI with the user response.
AT*E2STKI allows the external application to send the appropriate answer after receiving the unsolicited result code, and before the timeout expires.
If Answer command is sent once the timeout expires, an ERROR response is generated.
If <answer> parameter is not 0, a failure has occurred and no more parameters are sent. If the extra parameters are sent, the ME indicates
ERROR.

15.5 AT*E2STKI

M2M STK Get Input

 

 

 

 

 

 

 

Description

 

Command

Possible responses

 

 

 

 

 

Answer to the

AT*E2STKI=<answer

•_ +CME ERROR <err>

 

reception of GET

>,

•_ OK

 

INPUT

 

[<response_type>,

 

 

 

<response_length>,

•_ ERROR

 

 

 

<user_response>]

 

 

Test if the

 

AT*E2STKI=?

•_ *E2STKI: (list of supported

 

command is

 

<answer>),(list of supported

 

supported

 

 

<response_type>),

<response_length>, <user_response>

•_ +CME ERROR <err>

•_ OK

•_ ERROR

Test command returns the list of suported values, and <prompt_text_length>.

Values follow GSM 11.14 standard.

<answer> Description

0OK.

Performed as required: the text was displayed. It corresponds to ‘00’ command performed succesfully, described in the GSM standard

1Failed.

User terminated session: the text was displayed as requested and the user wants to end the proactive session. It corresponds to ‘10’ proactive session terminated by the user, described in the GSM standard

Owner’s Manual

Rev 1.0

Page 232 of 232