Blind dial delay control | ATS6=[<dly>] | OK |
|
| |
Read the current setting ATS6? | <dly> | |
|
|
|
Show if the command is | ATS6=? | S6: (list of supported |
supported |
| <dly>s) |
|
|
|
Included for compatibility. No functionality
<dly> | Description |
|
|
2 | Wait two seconds before blind dialing. Default value |
|
|
Number of seconds to wait before blind dialing | |
|
|
3.8ATS7 Connection Completion Timeout
Description | Command | Possible Responses |
Set connection | ATS7=[<tmo>] |
completion timeout |
|
Read the current setting ATS7?
Show if the command is ATS7=? supported
•_ OK
•_ ERROR <tmo>
S7: (list of supported <tmo>s)
Defines the maximum time allowed between completion of dialling and the connection being established. If this time is exceeded then the connection is aborted.
<tmo> | Description |
|
|
50 | Timeout value in seconds. Default value |
|
|
Timeout value in seconds | |
|
|
Owner’s Manual | Rev 1.0 | Page 75 of 75 |