Sony Ericsson TT4031 (SE-GM29) 15.3 AT*E2STKD, M2M STK Display Text

The unsolicited result codes defined in sections below can be received.

15.3 AT*E2STKD		M2M STK Display Text
	Description		Command	Possible responses
	Answer to the		AT*E2STKD=<answer	•_ +CME ERROR <err>
	reception of		>	•_ OK
	DISPLAY TEXT
				•_ ERROR
	Test if the		AT*E2STKD=?	•_ *E2STKD:
	command is			(list of supported <answer>)
	supported			•_ +CME ERROR <err>

•_ OK

•_ ERROR

The ME passes the parameters within DISPLAY TEXT command to the external application by means of the unsolicited result code *E2STKD.

Command AT*E2STKD allows the external application to send the appropriate answer after receiving the unsolicited result code, and before the timeout expires.

If Answer command is sent once the timeout expires, an ERROR response is generated.

Test command returns the list of supported <answer>. Values follow GSM 11.14 standard

<answer> Description

0OK.

Performed as required: the text was displayed and cleared as requested. It corresponds to ‘00’ Command performed successfully, described in the GSM standard

1Failed.

User Terminated Session: the text was displayed as requested and the user wants to end the proactive session. It corresponds to ‘10’ Proactive session terminated by the user, described in the GSM standard

2Failed.

User requests backwards move: the text was displayed as requested and the user wants to go backwards in the session. It corresponds to ‘11’ Backward move in the proactive SIM session requested by the user

3Failed.

No response from user: the text was displayed, and although the clear condition was “Wait for user to clear”, the user did not react. It corresponds to ‘12’ no response from user

Owner’s Manual Rev 1.0 Page 228 of 228