10.6ATE Command Echo
Description | Command | Possible Responses |
|
|
|
Request Command Echo | ATE[<value>] | •_ OK |
| ATE=[<value>] | •_ ERROR |
|
| |
Show the current | ATE? | <value> |
setting |
|
|
|
|
|
Show if the command is | ATE=? | E: (list of supported |
supported |
| <value>s) |
|
|
|
The setting of this parameter determines whether or not the DCE echoes characters received from the DTE during command state and online command state.
<value> Description
0DCE does not echo characters during command state and online command state
1DCE echoes characters during command state and online command state. Default value
10.7ATV DCE Response Format
Description | Command | Possible Responses |
Set DCE response | ATV[=]<value> |
format |
|
Read the current setting ATV?
Show if the command is ATV=? supported
•_ OK
•_ ERROR
V:<value>
V:(list of supported <value>s)
Select either descriptive or numeric response codes. The ATV command sets the verbose numeric response codes and strips off the <S3><S4> additions to the command response.
<value> Description
Owner’s Manual | Rev 1.0 | Page 143 of 143 |