Sony Ericsson TT4031 (SE-GM29) NOTE! - SMS-COMMANDsand SMS-STATUS-REPORTscannot be stored in text mode

Write message to	AT+CMGW [=<oa/da>
memory	[,<tooa/toda>[,<stat>]]
	] <CR>
	Text is entered <ctrl-
	Z/ESC>

Show if the command isAT+CMGW=? supported

•_ +CMGW: <index>

•_ +CMS ERROR: <err>

•_ OK

•_ ERROR

•_ OK

•_ ERROR

Stores message (either SMS-DELIVER or SMS-SUBMIT) to memory storage <mem2>. Memory location <index> of the stored message is returned. By default message status will be set to ‘stored unsent’, but parameter <stat> allows also other status values to be given. The entering of text is done as specified in the send message command, +CMGS. If writing fails, final result code +CMS ERROR: <err> is returned.

NOTE! - SMS-COMMANDs and SMS-STATUS-REPORTs cannot be stored in text mode.

<stat>	Description
2	Stored unsent message (only applicable to SMs)

Note!_

	<oa>	Description
	String type	GSM 03.40 TP-Originating-Address Value in string
		format; BCD numbers	(or GSM default alphabet
		characters) are converted to characters of the currently
		selected TE character (refer command +CSCS). Type of
		address given by <tooa>
Note!_
	<da>	Description
	String type	GSM 03.40 TP-Destination-Address Value in string
		format; BCD numbers	(or GSM default alphabet
		characters) are converted to characters of the currently
		selected TE character (refer command +CSCS). Type of
		address given by <toda>
Note!_
	<tooa>	Description
	String type	GSM 04.11 TP-Originating-Address Type-of-Address octet
		in integer format (default refer <toda>)
Note!_
Owner’s Manual		Rev 1.0	Page 194 of 194