1Enables reporting of local port rate (+ILRR: is transmitted)

10.14 AT+IPR Cable Interface Port Command

Description

Command

Possible Responses

 

 

 

Defines fixed DTE rate

AT+IPR=[rate]

•_ OK

 

 

 

 

•_ ERROR

Read the current setting AT+IPR?

•_ +IPR:<rate>

 

 

•_ OK

 

 

•_ ERROR

Show if the command is AT+IPR=? supported

•_ +IPR: (), (list of fixed-only <rate>s)]

•_ OK

•_ ERROR

Specifies the data rate at which the DCE will accept commands, in addition to 1200 bits/s or 9600 bits/s (as required in v25ter, subclause 4.3). It may be used to select operation at rates used by the DTE, which the DCE is not capable of automatically detecting.

The specified rate takes effect following the issuance of any result code(s) associated with the current command line.

<rate> Description

Discrete integer The <rate> value specified shall be the rate in bits per

value second at which the DTE-DCE interface should operate, e.g. “19 200” or “115 200”. The rates supported by a particular DCE are manufacturer specific.

The following rates, are supported;

1200

2400

4800

9600

19200

38400

57600

115200

230400

460800

Owner’s Manual

Rev 1.0

Page 150 of 150