Read the current

AT+ICF?

setting

 

Show if the command AT+ICF=? is supported

•_ +ICF: <format>,<parity>

•_ OK

•_ ERROR

•_ +ICF: (list of supported <format>s), (list of supported <parity>s)

•_ OK

•_ ERROR

This extended-format compound parameter is used to determine the local serial port start-stop (asynchronous) character framing used by the DCE to accept DTE commands, and while transmitting information text and result code, if this is not automatically determined; (Not supported) +IPR=0 forces +ICF=0 (see +IPR).

<format> Description

38 Data 1 Stop. Default value

<parity> Description

3Space. Default value

10.12 AT+IFC DTE-DCE Local Flow Control

Description

Command

Possible Responses

 

 

 

Defines DTE-DCE local

AT+IFC=[<by_te>,

•_ OK

flow control

[<by_ta>]]

•_ ERROR

 

 

Read the current setting AT+IFC?

+IFC:

 

 

<by_te>,<by_ta>

 

 

 

Show if the command is

AT+IFC=?

+IFC: (list of supported

supported

 

<by_te>s,<by_ta>s)

 

 

 

Defines the flow control between the modem and the computer when in online data mode.

No flow control is enabled in any of the command modes.

Owner’s Manual

Rev 1.0

Page 148 of 148