Test if the command is AT+CPAS=? supported

•_ +CPAS:

(list of supported <pas>s)

•_ +CME ERROR <err>

•_ OK

•_ ERROR

Returns the activity status <pas> of the ME. It can be used to interrogate the ME before requesting action from the phone.

When the command is executed without the <mode> argument, the command returns <pas>-values from 0 to 128 (for supported values se table 1 below). When, on the other hand, the command is executed with the <mode> argument set to 1, the command may return Ericsson specific <pas> values from 129 to 255 (for supported values see the table below).

Test command returns values supported by the ME as a compound value: refer to GSM 07.07.

<pas> Description

0

Ready (ME allows commands from TA/TE)

3Ringing (ME is ready for commands from TA/TE, but the ringer is active)

4Call in progress (ME is ready for commands from TA/TE, but a call is in progress)

129In idle state, (operator name/clock/date). This state is a sub-state to ‘ready’ (0) and has the following definition: In Idle state, that is, operator, clock and date (is set) shown on the display

No conversation or data call in progress No sub-menus shown on the display

4 Only digits, clear, *, NO and # allowed in this mode, not changing mode

130Mobile oriented call in progress. This is a sub-state to ‘call in progress’

131Mobile terminated call in progress. This is a sub-state to ‘call in progress’

<mode> Description

1Allows the CPAS to return Ericsson specific <pas> values, such as 129, 130 and 131

Owner’s Manual

Rev 1.0

Page 86 of 86