Read the current | AT+CGREG? |
settings |
|
Test if the command is AT+CGREG=? supported
•_ +CGREG: <n>,<stat>[,<lac>, <ci>]
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
•_ +CGREG: (list of supported <n>s)
•_ OK
•_ ERROR
Controls the presentation of an unsolicited result code +CGREG: <stat> when <n>=1 and there is a change in the GPRS/packet domain network registration status of the MS, or code +CGREG: <stat>[,<lac>,<ci>] when <n>=2 and there is a change of the network cell.
NOTE! - If the GPRS/Packet Domain MS also supports circuit mode services, the +CGREG command and +CGREG: result code apply to the registration status and location information for those services.
<n> Description
0Disable network registration unsolicited result code
1Enable network registration unsolicited result code
2Enable network registration and location information unsolicited result code
Note!_
<stat> Description
0Not registered, MS is not searching for a new operator to register with
1Registered, home network
2Not registered, but MS is searching for a new operator to register with
3Registration denied
4Unknown
5Registered, roaming
Note!_
Owner’s Manual | Rev 1.0 | Page 126 of 126 |