Test if the command is AT+CSSN=? supported
•_ +CSSN: (list of supported <n>s),(list of supported <m>s)
•_ +CME ERROR <err>
•_ OK
•_ ERROR
This command refers to supplementary service related network initiated notifications. The set command enables or disables the presentation of notification result codes from TA to TE.
When <n>=1 and a supplementary service notification is received after a mobile originated call setup, unsolicited result code +CSSI: <code1>[,<index>] is sent to TE before any other MO call setup result codes presented in this ETS or in V.25ter. When several different <code1>s are received from the network, each of them shall have its own +CSSI result code.
When <m>=1 and a supplementary service notification is received during a mobile terminated call setup or during a call, or when a forward check supplementary service notification is received, unsolicited result code +CSSU: <code2>[,<index>] is sent to TE. In case of MT call setup, result code is sent after every +CLIP result code (refer command “Calling line identification presentation +CLIP”) and when several different <code2>s are received from the network, each of them shall have its own +CSSU result code.
Note!_ The difference between <index> and <cindex> is that <index> is a position mark while <cindex> is a unique value for each CUG. <index> is not supported.
Test command returns values supported by the TA as a compound value.
<n> Description
0Disable the +CSSI result code presentation status in the
TA
1Enable the +CSSI result code presentation status in the
TA
<m> Description
0Disable the +CSSU result code presentation status in the
TA
1Enable the +CSSU result code presentation status in the
TA
Owner’s Manual | Rev 1.0 | Page 269 of 269 |