|
| •_ ERROR |
|
|
|
Test if the | AT*E2STKL=? | •_ *E2STKL: (list of supported |
command is |
| <answer>), |
supported |
| (list of supported |
|
| <user_response>) |
|
| •_ +CME ERROR <err> |
|
| •_ OK |
|
| •_ ERROR |
|
|
|
The ME passes the parameters within SELECT ITEM command to the external application by means of the unsolicited result code *E2STKL.
Command AT*E2STKL allows the external application to send the appropriate answer after receiving the unsolicited result code, and before the timeout expires.
If Answer command is sent once the timeout expires, an ERROR response is be generated.
If <answer> parameter is not 0, a failure has occurred and no more parameters are sent. If the extra parameters are sent, the ME indicates
ERROR.
Values follow GSM 11.14 standard.
<answer> Description
0OK.
Performed as required. It corresponds to ‘00’ command performed succesfully, described in the GSM standard
1Failed.
User terminated session. It corresponds to ‘10’ Proactive session terminated by the user, described in the GSM standard
2Failed.
User requests backwards move. It corresponds to ‘11’ Backward move in the proactive SIM session requested by the user
3Failed.
No response from user. It corresponds to ‘12’ no response from user
4Failed.
Screen is busy: the text could not be displayed
<user_response> Description
Owner’s Manual | Rev 1.0 | Page 235 of 235 |