0TA/ME shall calculate a proper number of receive timeslots from currently selected fixed network user rate (<speed> parameter from +CBST command, and <codings>, and <wRx> (or <maxRx> from +CHSD command if <wRx>=0)

1Wanted air interface user rate is 9.6 kbit/s

2Wanted air interface user rate is 14.4 kbit/s

3Wanted air interface user rate is 19.2 kbit/s

4Wanted air interface user rate is 28.8 kbit/s

Note!_

<wRx> Description

0TA/ME shall calculate a proper number of receive timeslots from currently selected <wAiur> and <codings> See note below

1Wanted number of receive timeslots is 1

2Wanted number of receive timeslots is 2

Note!_

<topRx> Description

0Indicates that the user is not going to change <wAiur> and /or <wRx> during the next call

1Top value for <wRx> that user is going to request during the next established non-transparent HSCSD call is 1

2Top value for <wRx> that user is going to request during the next established non-transparent HSCSD call is 2

Note!_

<codings> Description

4Indicates that the accepted channel coding for the next established non-transparent HSCSD call is 9.6 kbit/s only

Note!_

7.4AT+CHSR HSCSD Parameters Report

Description

Command

Possible Responses

 

 

 

Owner’s Manual

Rev 1.0

Page 131 of 131