This S-parameter represents the decimal IA5 value of the character generated by the DCE as part of the header, trailer, and terminator for result codes and information text, along with the S3 parameter (see the description of the V parameter for usage).

If the value of S4 is changed in a command line, the result code issued in response to that command line will use the new value of S4.

<value> Description

10Formatting character. Default value

Note: ASCII character 10 is equivalent to <LF>

0 to 127

Formatting character

 

 

3.6ATS5 Command Line Editing Character (BACKSPACE)

Description

Command

Possible Responses

 

 

 

Request Command Line

ATS5=<value>

•_ OK

Editing Character

 

•_ ERROR

 

 

Shows the current

ATS5?

<value>

setting

 

 

 

 

 

Show if the command is

ATS5=?

S5: (list of supported

supported

 

<value>s)

 

 

 

This S-parameter represents the decimal IA5 value of the character recognised by the DCE as a request to delete from the command line the immediately preceding character.

<value>

Description

 

 

8

Line editing character. Default value

 

 

0 to 127

Line editing character

 

 

3.7ATS6 Blind Dial Delay Control

Description

Command

Possible Responses

 

 

 

Owner’s Manual

Rev 1.0

Page 74 of 74