<toda>

Description

 

 

String type

GSM 04.11 TP-Destination- Address Type-of-Address

 

octet in integer format (when first character of <da> is

 

+(IRA 43) default is 145, otherwise default is 129

 

 

Note!_

<index>

Description

 

 

Integer type

Value in the range of location numbers supported by the

 

associated memory

 

 

Note!_

13.7AT+CMGS Send Message

PDU Mode

Description

Command

Possible Responses

Send message

AT+CMGS=<length>

 

<CR>

 

PDU is given<ctrl-

 

Z/ESC>

Show if the command is AT+CMGS=? supported

•_ +CMGS: <mr>[,<ackpdu>]

•_ +CMS ERROR: <err>

•_ OK

•_ ERROR

•_ OK

•_ ERROR

Sends a message from a TE to the network (SMS-SUBMIT). Message reference value <mr> is returned to the TE on successful message delivery. Optionally, when AT+CSMS <service> value is 1 and there is network support, <ackpdu> is returned. Values can be used to identify message upon unsolicited delivery status report result code. If sending fails in a network or an ME error, final result code +CMS ERROR: <err> is returned. This command is abortable.

<length> must indicate the number of octets coded in the TP layer data unit to be given (i.e. SMSC address octets are excluded).

The TA shall send a four character sequence <CR><LF><greater_than><space> (IRA 13, 10, 62, 32) after command line is terminated with <CR>; after that PDU can be given from TE to ME/TA.

Owner’s Manual

Rev 1.0

Page 195 of 195