that is used in the +CGDCONT command, the +CGQREQ command is effectively an extension to the +CGDCONT command. The QoS profile consists of a number of parameters, each of which may be set to a separate value.
A special form of the set command, +CGQREQ= <cid> causes the requested profile for context number <cid> to become undefined.
<cid> | Description |
|
|
Integer type | Parameter which specifies a particular PDP context |
| definition |
|
|
|
|
<precedence> | Description |
|
|
0 | Subscribed (from network) value used |
|
|
1 | High priority |
|
|
2 | Normal priority |
|
|
3 | Low priority |
|
|
|
|
<delay> | Description |
|
|
0 | Subscribed (from network) value used |
|
|
Delay class | |
|
|
|
|
<reliability> | Description |
|
|
0 | Subscribed (from network) value used |
|
|
Reliability class | |
|
|
<peak> Description
0Subscribed (from network) value used
1Up to 1 000 (8 kbits/s)
2Up to 2 000 (16 kbits/s)
3Up to 4 000 (32 kbits/s)
4Up to 8 000 (64 kbits/s)
5Up to 16 000 (128 kbits/s)
6Up to 32 000 (256 kbits/s)
Owner’s Manual | Rev 1.0 | Page 124 of 124 |