String type

Manufacturing specific. Should be left empty but not

 

omitted i.e.

 

commas shall mark the place were it should be. Used

 

character set should be the one selected with command

 

Select TE Character Set +CSCS

 

 

<scts>

Description

 

 

String type

GSM 03.40 TP-service-centre-time-stamp in time-string

 

format (refer <dt>)

 

 

 

 

<length>

Description

 

 

Integer type

Value indicating in PDU mode (+CMGF=0), the length of

 

the actual TP data unit in octets (i.e. the RP layer SMSC

 

address octets are not counted in the length)

 

 

<data>

The entered text should be formatted as follows:

if <dcs> (set with +CSMP) indicates that GSM 03.38 default alphabet is used and <fo> indicates that GSM 03.40 TP-User-Data-Header-Indication is not set:

if TE character set other than "HEX" (refer command Select TE Character Set +CSCS in TS 07.07): ME/TA converts the entered text into GSM alphabet according to rules of Annex A; backspace can be used to delete last character and carriage returns can be used (previously mentioned four character sequence shall be sent to the TE after every carriage return entered by the user);

if TE character set is "HEX": the entered text should consist of two IRA character long hexadecimal numbers which ME/TA converts to 7-bit characters of GSM alphabet (e.g. 17 (IRA 49 and 55) will be converted to character ￿ (GSM 23));

if <dcs> indicates that 8-bit or UCS2 data coding scheme is used or <fo> indicates that GSM 03.40 TP-User-Data-Header-Indication is set: the entered text should consist of two IRA character long hexadecimal numbers which ME/TA converts into 8-bit octet (e.g. two characters 2A (IRA 50 and 65) will be converted to an octet with integer value 42);

sending can be cancelled by giving <ESC> character (IRA 27)

<ctrl-Z> (IRA 26) must be used to indicate the ending of the message body

<fo> Description

0First octet of SMS-DELIVER in integer format

1First octet of SMS_SUBMIT in integer format

2First octet of SMS-STATUS-REPORT in integer format

Owner’s Manual

Rev 1.0

Page 218 of 218