Description

Command

Possible responses

Answer to the

AT*E2STKG

reception of

=<answer>,

GET INKEY

[<response_type>,

Test if the

<user_response>]

AT*E2STKG=?

command is

 

supported

 

•_ +CME ERROR <err>

•_ OK

•_ *E2STKG:

(list of supported <answer>), (list of supported <response_type>), <user_response>

•_ +CME ERROR <err>

•_ OK

•_ ERROR

The ME passes the parameters within GET INKEY command to the external application by means of the unsolicited result code E2STKG.

The external application then sends AT*E2STKG with the user response.

Answer command allows the external application to send the appropriate answer, after receiving the unsolicited result code, and before the timeout expires.

If Answer command is sent once the timeout expires, an ERROR response is generated.

If <answer> parameter is not 0, a failure has occurred and no more parameters are sent. If the extra parameters are sent, the ME indicates

ERROR.

Test command returns the list of supported values, and the maximum value of <prompt_text_length>.

Values follow GSM 11.14 standard.

<answer> Description

0OK.

Performed as required: the text was displayed. It corresponds to ‘00’ Command performed successfully, described in the GSM standard

1Failed.

User Terminated Session: the text was displayed as requested and the user wants to end the proactive session. It corresponds to ‘10’ Proactive session terminated by the user, described in the GSM standard

2Failed.

User requests backward move: the text was displayed as requested and the user wants to go backwards in the session. It corresponds to ‘11’ Backward move in the proactive SIM session requested by the user

Owner’s Manual

Rev 1.0

Page 230 of 230