the operation executes successfully - use the AT*E2SSI command to gain feedback of the operation status.

Refer to GSM 02.30 for Public MMI services and codes.

<SS_String>

Description

 

 

String Type

String in double quotes, containing a Public MMI

 

command to modify, activate, interrogate or deactivate a

 

Supplementary Service. String can contain values

 

‘0-9’, ‘*’ and ‘#’

 

 

16.10 AT*E2SSI

M2M Supplementary Service Indications

 

 

 

 

 

Description

Command

Possible Responses

Set Supplementary

AT*E2SSI=<op>

Service indications

 

Displays current settingsAT*E2SSI?

Shows if the command AT*E2SSI=? is supported

•_ ERROR

•_ OK

*E2SSI: <op>

•_ *E2SSI: (list of supported <op>s)

•_ ERROR

This command allows the user to display the unsolicited response code *E2SSI on network responses (either command confirmation or error responses) for Supplementary Services. This can be used in conjunction with the AT+CSSN command which gives responses on the network notification of SS status.

The default setting is OFF, where responses are disabled.

<op> Description

0Disable *E2SSI indications. Default value

1Enable *E2SSI indications

Unsolicited Result codes:

*E2SSI: <errorcode>[,<Opcode>[,<SS_Code>,[<BasicServChoice>, <BasicServValue>],[<SS_Status>],[<ForwardedToNr>], [<NoReplyConditionTime>], [<CLI_RestrictionOption>]]]

Owner’s Manual

Rev 1.0

Page 255 of 255