Enables or disables the sending of unsolicited result codes from ME to TE in the case of key pressings, display changes, and indicator state changes. <mode> controls the processing of unsolicited result codes specified within this command. <bfr> controls the effect on buffered codes when <mode> 1, 2 or 3 is entered. If the ME does not support setting, +CME ERROR: <err> is returned.
<mode> Description
0Buffer unsolicited result codes in the TA; if TA result code buffer is full, codes can be buffered in some other place or the oldest ones can be discarded
3Forward unsolicited result codes directly to the TE;
<ind> Description
0No indicator event reporting
1Indicator event reporting using result code +CIEV: <ind>,<value>. <ind> indicates the indicator order number (as specified for +CIND) and <value> is the new value of indicator. Only those indicator events, which are not caused by +CIND shall be indicated by the TA to the
TE
<bfr> Description
0TA buffer of unsolicited result codes defined within this command is cleared when <mode> 1...3 is entered
3.22AT+CPAS Phone Activity Status
Description | Command | Possible Responses |
|
|
|
Execute Phone Activity | AT+CPAS[=<mode>] | •_ +CPAS: <pas> |
Status |
| •_ +CME ERROR <err> |
|
| |
|
| •_ OK |
|
| •_ ERROR |
Owner’s Manual | Rev 1.0 | Page 85 of 85 |