Audio
AT*E2EAMS and AT*E2APR are new commands that replace the funtionality offered by the *EALR, *EAMS, *EARS and *ELAM commands. Use the new commands in new applications. The old commands are included for compatibility.
4.1AT*E2EAMSEricsson M2M Audio Profile Modification
Description Command | Possible Responses |
Request operation with audio profile
Display set profile
Show if the command is supported
AT*E2EAMS=
<op>[,<TxPGA>,
<RxPGA>,<SideToneGain>,
<AuxInGain>,<MicInGain>,
<TxAGC>,<Volume>,
<MaxVolume>,<MicPath>,
<SpkPath>,<TxPCM>,
<RxPCM>,<HFAlgorithm>,
<LocalAudio>,<TxGainLow>,
<MicVolt2V>,<SideTone>,
<NoiseRed>,<EchoCancel>,<
AnalogRing>,][,<val>]]
AT*E2EAMS?
AT*E2EAMS=?
•_ ERROR
•_ OK
•_ *E2EAMS: <TxPGA>, <RxPGA>, <SideToneGain>, <AuxInGain>, <MicInGain>, <TxAGC>,<Volume>, <MaxVolume>, <MicPath>,<SpkPath>, <TxPCM>,<RxPCM>, <HFAlgorithm>, <LocalAudio>, <TxGainLow>, <MicVolt2V>, <SideTone>,<NoiseRed>, <EchoCancel>, <AnalogRing>
OK
•_ ERROR
•_ *E2EAMS:
(list of supported <op>s)
•_ ERROR
This command allows the modification and configuration of the current audio profile. An audio profile is a set of data which uniquely defines the way in which the audio paths, gains, DSP algorithms and switch setting are
Owner’s Manual | Rev 1.0 | Page 95 of 95 |