Note!_ Returns messages with status value <stat> from preferred message storage <mem1> to the TE. Entire data units <pdu> are returned. If status of the message is ‘received unread’, status in the storage changes to ‘received read’. If listing fails, final result code +CMS ERROR: <err> is returned.
<stat> Description
0Received unread message (i.e. new message)
1Received read message
2Stored unsent message (only applicable to SMs)
3Stored sent message (only applicable to SMs)
4All messages (only applicable to +CMGL command)
Note!_
<index> | Description |
|
|
Integer type | Value in the range of location numbers supported by the |
| associated memory |
|
|
Note!_
<alpha> | Description |
|
|
String type | Manufacturing specific. Should be left empty but not |
| omitted |
|
|
Note!_
<length> | Description |
|
|
Integer type | Value indicating in PDU mode (+CMGF=0), the length of |
| the actual TP data unit in octets (i.e. the RP layer SMSC |
| address octets are not counted in the length) |
|
|
Note!_
<pdu> Description
In the case of SMS: GSM 04.11 SC address followed by
GSM 03.40 TPDU in hexadecimal format: ME/TA converts each octet of TP data unit into two IRA character long hexadecimal number (e.g. octet with integer value 42 is presented to TE as two characters 2A (IRA 50 and 65)) In the case of CBS: GSM 03.41 TPDU in hexadecimal
Owner’s Manual | Rev 1.0 | Page 214 of 214 |