13.4AT+CSCA Service Centre Address
Common for both PDU and Text Modes
Description | Command | Possible Responses |
Set service centre | AT+CSCA=<sca> |
address | [,<tosca>] |
Show the current | AT+CSCA? |
setting |
|
Show if the command is AT+CSCA=? supported
•_ OK
•_ ERROR
•_ +CSCA: <sca>,<tosca>
•_ OK
•_ ERROR
•_ OK
•_ ERROR
Updates the SMSC address, through which mobile originated SMs are transmitted. In text mode, the setting is used by send (+CMGS) and write (+CMGW) commands. In PDU mode, the setting is used by the same commands, but only when the length of the SMSC address coded into <pdu> parameter equals zero. Note that a “+” in front of the number in <sca> has precedence over the <tosca> parameter, so that a number starting with “+” will always be treated as an international number.
<sca> | Description | |
|
|
|
string type | GSM 04.11 (3G TS 24.011) RP SC address | |
| field in string format; BCD numbers (or GSM default | |
| alphabet characters) are converted to characters of the | |
| currently selected TE character set | |
|
|
|
<tosca> |
| Description |
|
|
|
integer type |
| GSM 04.11 (3G TS 24.011) RP SC address |
|
| address octet in integer format |
129ISDN/telephony numbering plan, national/international unknown
145 | ISDN/telephony numbering plan, international number |
161ISDN/telephony numbering plan, national number
Owner’s Manual | Rev 1.0 | Page 191 of 191 |