•_ OK

•_ ERROR

Allows the TE to specify a minimum acceptable profile which is checked by the MS against the negotiated profile returned in the Activate PDP Context Accept message.

The set command specifies a profile for the context identified by the (local) context identification parameter, <cid>. Since this is the same parameter that is used in the +CGDCONT command, the +CGQMIN command is effectively an extension to the +CGDCONT command. The QoS profile consists of a number of parameters, each of which may be set to a separate value.

A special form of the set command, +CGQMIN=<cid> causes the minimum acceptable profile for context number <cid> to become undefined. In this case no check is made against the negotiated profile.

<cid>

Description

 

 

Integer type

Parameter which specifies a particular PDP context

 

definition

 

 

<precedence> Description

0Subscribed (from network) value used

1High priority

2Normal priority

3Low priority

 

<delay>

Description

 

 

 

 

 

 

0

Subscribed (from network) value used

 

 

 

 

 

1-4

Delay class

 

 

 

 

 

Owner’s Manual

Rev 1.0

Page 121 of 121