Value | General meaning |
OK | Command executed, no errors |
ERROR | Invalid command or command line too long |
NO DIALTONE | No dialing possible, wrong mode |
BUSY | Remote station busy |
NO ANSWER | Connection completion |
NO CARRIER | Link not established or disconnected |
Unsolicited Result Code
Unsolicited result codes indicate the occurrence of an event not directly associated with a command being issued from the TE.
1.3Error Codes
1.3.1+CME ERROR (Mobile Equipment Error Code)
This final result code is similar to the regular ERROR result code. If +CME ERROR: <err> is the result code for any of the commands in a command line, none of the commands in the same command line will be executed (neither ERROR nor OK result code shall be returned as a result of a completed command line execution). The format of <err> can be either numerical or alphabetical, and is set with the +CMEE command.
The table below provides the numerical values for the parameter <err>.
<err> | Description Syntax |
0Phone failure
1No connection to phone
2Phone
3Operation not allowed
4Operation not supported
5
10SIM not inserted
11SIM PIN required
12SIM PUK required
13SIM failure
Owner’s Manual | Rev 1.0 | Page 59 of 59 |