-Turn on Relay #

Active the Relay at the set time. If there are no Relays connected, Turn on Relay # function will not display in drag down list. The Relay number will depend on how many Relays are connected.

3.Specify to either schedule it weekly or one time. Click ~ to make a selection.

4.Click on the blocks to set the schedule (see also Chapter 4.5.1). Or click All to select all. To store the setting, click Save. To remove the settings, click Clear.

5.To end Schedule Setting, click OK to exit and accept the setting and Cancel to exit without saving the setting.

4.5.1Set schedule at specific portion of time

1.Right click the colored blocks.

2.In the Select time dialog box, click to enable or disable the portion you want to set.

3.Click OK to accept the setting and Cancel to exit without saving the setting.

4.6 Backup Setting

In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 represent the camera number. When you back up the file, you may find QLogViewer and Player application included in the backup folder (see also Chapter 5).

4.6.1To Backup file

1.Select the date of the recorded file in the calendar you want to backup. Use and buttons to shift the calendar to the left or right.

2.In the table below, click on the blue block to select the recorded file. The blue block turns red when it is selected. The block that appears in white doesn’t have data. If you want to set

59

Page 67
Image 67
Speco Technologies PC Pro Series Backup Setting, Set schedule at specific portion of time, To Backup file, Turn on Relay #