Speco Technologies PC Pro Series user manual Enlarge Camera View, Relay Output, Play Warning Sound

displayed on TV when the alarm is triggered.

~Alarm Camera: the channel video that has an alarm occurred will be displayed on TV.

~Camera #(1~32): select the camera channel video that you want to be displayed on when an alarm is activated.

b.Retrieve time: set the waiting duration before system switching back to original display mode on automatically. If the retrieve time is un-mark, the alarm video will keep displaying until user switches back to normal display mode manually. The retrieve time range is 3~ 600 seconds.

-Enlarge Camera View

Switch to only display video in Preview/Advanced mode from where the alarm is activated.

a.Select the camera from drop down list to specify which camera video to be enlarged on screen when the alarm is triggered.

~Alarm Camera: the channel video that has an alarm occurred will be enlarged on screen.

~Camera # (1~32): the selected channel video that will be enlarged on screen when an alarm is activated.

b.Retrieve time: set the waiting duration before system switching back to original Preview mode. If the retrieve time is un-mark, the alarm video will keep enlarging until user switch back to Preview mode manually. The retrieve time range is 3~ 600 seconds.

-Relay Output

Set to enable/disable the relay operation when the alarm is activated and to extend additional time in second before it stops the relay operation (see also Chapter 4.9.1).

-Play Warning Sound

Play alarm sound. To setup click Detail (see also Chapter 4.9.2).

-Make Phone Calls

Dial and contact the number in the list. To setup click Detail (see also Chapter 4.9.3). To use this feature, the PC must have a voice modem connected to it. The supported audio system is only 8KHz and 16Bit mono.

-Send E-mail

Send an electronic text message. To setup click Detail (see also Chapter 4.9.4).

-File Transmission via FTP

67