69

4.9.1 To Setup Alarm Relay:

1. Beside the Relay Output check box, click Detail.
2. In the Alarm Relay dialog box, select from the available
relay list and in the ON column, set to enable/disable the
relay operation when the alarm is activated.
3. In the Retrieve time check box, you may enable/disable to
extend the relay operation time and set the duration in
second.
4. Click OK to exit and accept the setting and Cancel to exit
without saving the setting.

4.9.2 To Setup the Alarm Sound Setting:

1. Beside the Play Warning Sound check
box, click Detail.
2. In the Alarm Sound Setting dialog box,
click to select other wav file from
other source or folder, Play to listen,
Record to make a new copy of a sound.
3. If you click
Record, you will be prompted
if you want to replace the file. Click OK to
continue and Cancel to discontinue.
4. When the Sound Recorder appears, use
the record control panel to record, stop,
play, rewind and forward. If you want to
keep the existing file, click File > Save
As…, enter filename and click Save.
Make sure you have microphone
connected to your PC.
5. Click
OK to exit and accept the setting and Cancel to exit without saving the setting.