Speco Technologies PC Pro Series user manual TV Out, Pos, Virtual Keyboard

the right text box and then click OK.

(5) TV Out

Set the display time gap from 3 to 10 sec. before it switches to the next camera.

(6) Miscellaneous

Enable the conditions in Miscellaneous section you want the system to perform.

-Beep if no signal

Make sound when the video signal is lost. -Mandatory Record

Always record video when software is running -Playback Mode

Select the mode of playback the video.

Select date and time: Select the date and time which user wants to playback.

Play the last file: Automatically playback the video from the last hour

Instant Playback: Automatically playback the video which has just recorded -Date Format

Select the date format which wants to display in Select date and time playback mode -Auto Scan Period

Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the next video in cycle depending on the set time gap.

(7) Login

Enable the conditions in Login section you want the system to automatically carry out. -Auto record when login

Automatically start video recording when the DVR is executed. -Auto start Network when login

Automatically connect to network when the DVR is executed. -Login to compact mode

Switch to compact mode directly when the DVR is executed.

(8) POS

Set from which camera screen to display the data from the POS equipment. To set the text flow and color format, click Advanced.

(9) UPS (Uninterruptible Power Supply)

Protect the system from damaging, such as power surges or brownouts. This automatically gives time to close the DVR properly when the battery backup power has reached the Shutdown when capacity below percentage level setting. The UPS device must be connected to your DVR.

i The DVR system default supports SPECO UPS.

(10) Virtual Keyboard

If the keyboard is not available, you may use the Virtual Keyboard. Just click to show the virtual keyboard. For uppercase and lowercase, click shift button.

112