4.Make sure that the release lever is back.

If fanfold paper is already mounted in the printer, press the ( SE~&~cT1 button to park the paper in the off-line state, then move the release lever backwards.

5.Place a single sheet between the guides, placing the side on which you want to print towards the back of the printer. Gently push the paper down

in the guides until you feel it stop.

6. Now press the (

SETpE&C’

) button. The paper will be fed into the printer

and adjusted past the print head to a position ready for printing.

-

 

7.If you want to set the paper to a different position, set the printer off-line

by pressing the ( ON LINE ) button, then set the paper by using the - micro-feed function. (For details, refer to Chapter 2.)

lease lever

I

Figure 1-10. Loading a single sheet

Page 18
Image 18
Star Micronics NX-1020 user manual Button. The paper will be fed into the printer