Star Micronics NX-1020 Select NLQ font , Select Courier characters , Select Sanserif characters , Select Script characters

Select NLQ font
Mode ASCII Decimal Hexadecimal
Both <ESC> “k” n 27 107 n 10 60 n
Selects an NLQ font according to the value of n. In draft mode, this
command remains dormant and takes effect later when NLQ is
selected. Ignored if the (FONT) button was pressed during power-
up.
n Font
0 Courier (initial value)
1 Sanserif
4 script
7 Orator
Select Courier characters
Mode] ASCII 1 Decimal Hexadecimal
Both 1 “(.. ‘Y” *IF’ “),. ‘7” “0” 1 40 40 70 41 41 48 1 28 28 46 29 29 30
Changes to the Courier NLQ font. Ignored if the (FoNt)button was
pressed during power-up.
Select Sanserif characters
Mode ASCII Decimal Hexadecimal
Both ,.(.. ..(,B “F’ ,,),, ,,),. "1" 40 40 70 41 41 49 28 28 46 29 29 31
Changes to the Sanserif NLQ font. Ignored if the (FONT)button was
pressed during power-up.
Select Script characters
Mode ASCII Decimal Hexadecimal
Bo* ‘.(.. ..(,, “F’ w)., ‘,)w -4" 40 40 m 41 41 52 28 28 46 29 29 34
Changes to the Script NLQ font. Ignored if the (J%NT) button was
pressed during power-on.
43