((05 Orange
Kc))6 Green
If you want to print a title in double-size Orator, then change to regular-size
fonts for other text, you can use these commands as follows:
File as seen on computer screen:

((F))7 ((SII.3

Printer commands

((F))O ((S))O

Font commands ((F))lcan be ((FII4embedded

((F))7anywhere ((F))9in a document.

Printout:
PRINTER COMMANDS
When you use these commands there are several points to note:
l The font ((F)) command is ignored if the (FON’T) button was held down
when power was switched on.
l A line consisting of commands alone prints as a blank line.
l The software will not know that these are commands, so you cannot trust
your software to give you the correct line width. The printed line may be
considerably shorter than the line on the screen; the extra space being the
space that was occupied by the commands.
One way to handle the last problem is to prepare your document without the
commands, then insert them as a final step, with the margins released. The
find, replace, and copy functions of word-processing software can be helpful
here.
If you do not use these commands or the panel controls, the printer will print
standard-size, draft characters.