Star Micronics NX-1020 Perform one n/216=inch reverse line feed , Feed paper n lines , Set top of page at current position , Set page length to n lines

Perform one n/216=inch reverse line feed
Mode ASCII Decimal Hexadecimal
Std. <ESC> “j” n 27 106 n 1B 6A n
Feeds the paper once by n/216 inches in the reverse direction, where
n is between 1 and 255. Does not move the print position right or left.
Does not change the line-spacing setting.
Feed paper n lines
hnode ASCII Decimal Hexadecimal _
<ESC> “f’ “1” n 27 102 49 n 1B 66 31 n
Std. <ESC> “f <l> n 27 102 1 n 1B 66 01 n
Feeds the paper n lines from the current line, where n is between 0
and 127.
Set top of page at current position
Mode ASCII Decimal Hexadecimal
IBM <ESC> “4” 27 52 1B 34
Sets the current position as the top-of-page position. Note that this
can also be done from the control panel.
Set page length to n lines
Mode ASCII Decimal Hexadecimal
Both <ESC> “c” n 27 67 n 1B 43 n
Sets the page length to n lines in the current line spacing, where n -
is between 1 and 127 in Standard mode or between 1 and 64 in IBM -
mode. Changing the line spacing later does not alter the physical
page length. The current line becomes the top of the page.
58