LOADING MULTI-PART FORMS

You can print on continuous multi-part forms with the built-in tractor unit. You can use multi-part forms that have up to four parts including the original when the Multi-part mode is selected with the EDS setting. (For details,

please refer to Chapter 3.)

 

It is recommended to use forms jointed by dotted or pasting under the normal

 

office condition.

 

Multi-part forms should be pressure sensitive, and should not be used in the

 

friction feed. (Bottom feed with the pull-tractor is recommended.)

-

 

NOTE: When printing continuous multi-part forms, care should be taken,

 

as the edges of the paper might be damaged.

 

The tolerance between the dotted or pasted position and other

 

positions must be less than 0.05 mm.

 

18

Page 26
Image 26
Star Micronics NX-1020 user manual Loading MULTI-PART Forms