Select character size Mode ASCII Decimal Hexadecimal
Both “(,, ‘.(.. ‘6s” .,),, .,).. n 40 40 83 41 41 n 26 28 53 29 29 n
Selects a combination of character height and width according to the
value of n, as below. Does not move the base line.
n Character width Character height
0 Single width Single height
1 Double width Single height
2 Single width Double height
3 Double width -
Double height
Double-height characters are always printed at near letter quality.
Double height printing temporarily cancels the super/subscript and
condensed printing modes, but these modes resume when the
printer returns to normal height.
Print double-height characters Mode ASCII Decimal Hexadecimal
Std. <ESC> “w” “1” 27 119 49 10 77 31
&SC> “W” cl> 27 119 1 10 77 01
Prints subsequent characters at double height without moving the
base line, and without changing the line spacing. Temporarily
cancels super/subscript and condensed printing modes.
Return to normal height Mode ASCII Decimal Hexadecimal -
Std. <ESC> “w” “0” 27 119 49 10 77 30
cEsc> “W" co> 27 119 0 10 77 00
Terminates double-height printing and prints subsequent characters
at normal height. Resumes super/subscript and condensed printing
if these modes were in effect before double height was selected.
54