UBCD396XT
24.Setting alerts
Your scanner can trigger alerts for several different events. The table below shows the different alerts and how to program them:
To sound an alert when |
| Follow these steps |
A channel becomes active | Edit the channel properties (Edit | |
| Channel#Set Alert): | |
| 1. | Go to the Program System menu and select |
|
| the system that contains the channel you |
|
| want set the alert for. |
| 2. | Select Edit Group, then select the group you |
|
| want. |
| 3. | Select Edit Channel, then select the channel |
|
| you want to set the alert for. |
| 4. | Select Set Alert. |
| 5. | Choose the Alert Tone and Alert |
| 1. | Light you want the scanner to use. |
|
| |
An active Talk Group on a | Edit the system properties (Edit Sys | |
system contains an emergency | Option#Emergency Alert): | |
flag | 1. | Go to the Program System menu and select |
| ||
|
| the system you want set the alert for. |
| 2. | Select Edit Sys Option, then select |
| 2. | Emergency Alert. |
| 3. | Choose the Alert Tone and Alert |
| 4. | Light you want the scanner to use. |
|
| |
The scanner detects a Close | Edit the Close Call properties: | |
Call hit | 1. | Go to the Close Call menu. |
| ||
| 2. | Select Set CC Alert . |
| 3. | Choose the Alert Tone and Alert |
|
| Light you want the scanner to use. |
| 4. | For Close Call Alerts, you can also have the |
|
| scanner pause before it resumes searching. |
|
| Select Set CC Pause to activate this feature. |
|
| |
The scanner gets a hit on a | Edit the | |
|
| |
channel | 1. | Go to the |
| 2. | Select |
86