UBCD396XT
| as a voice channel, but the scanner is |
| receiving data on it. |
| ∙ DAT: The current channel is configured |
| as a control channel, and the scanner is |
| receiving data on it. |
| ∙ ENC: The received signal is encrypted |
| P25 digitized voice, and the scanner has |
| muted the audio. |
| ∙ Cxx.x: The scanner has detected a |
| CTCSS code; the received code is |
| displayed in place of the Xs. |
| ∙ DCSxxx: The scanner has detected a |
| DCS code; the received code is |
| displayed in place of the Xs. |
| ∙ NAC: xxx: The scanner has detected a |
| P25 network address code (NAC); the |
| received code is displayed in place of |
| the Xs. |
|
|
Close call icon | Normal (open) icon: |
| ∙ Steady: Close call priority mode is on. |
| ∙ Blinking: Close Call Only mode is on, |
| or the scanner has detected a close call |
| signal. |
|
|
| Reversed (filled) icon: |
| ∙ Steady: Close call DND mode is on. |
| ∙ Blinking: Close call DND mode is on, |
| and the scanner has detected a close call |
| signal. |
|
|
Function icon | Steady: You tapped the FUNCTION key; the |
| scanner will remember the FUNCTION + key |
| combination for the next 3 seconds. |
| Blinking: You pressed & held the |
| FUNCTION key: the scanner will remember |
| the FUNCTION + key combination until you |
| tap FUNCTION again. |
Group number line (GRP) | In Scan mode: The group Quick Key numbers |
| (GQK) of any unlocked groups in the current |
| system or site are displayed on this line. The |
| GQK number of the group that is currently |
| 16 |
