Uniden UBCD396XT Single-Frequency P25 Trunked Systems, Programming a Single-Frequency P25 System

UBCD396XT

16.Single-Frequency P25 Trunked Systems

Single-frequency P25 systems are almost idfentical to standard P25 systems, except they only have one site per system and the system can use a P25 network address.

Programming a Single-Frequency P25 System

To program a single-frequency P25 system, you'll need to program the required elements in following order:

Create a system

1.Go to the Program System menu and choose New System.

2.The scanner will prompt you for the System Type. Select P25.

3.When the scanner prompts you to select Standard Trunk or One-Freq Trunk select One-Freq Trunk, then tap YES.

4.The scanner creates the system with a default name. Select Edit Name if you want to change it.

5.If you need to change any of the system properties, you can do that now. Unless a property is Required, you can operate the system without changing the default settings.

System properties

(All of these options can be found under the Program System menu. If necessary, the submenu and the exact option name are listed beside each property.)

Required	None
	Name (Edit Name)
Recommended	Network address (P25 NAC Option)
	Number tag (Set Number Tag)
	Automatic gain control (AGC) (Set Audio
	AGC)
Optional	Delay time (Set Delay Time)
	ID format (Set ID Format (DEC/HEX)
	ID scan/search (ID Scan/Search)

59