Create at least 1 frequency in each site | Uniden UBCD396XT guide

	UBCD396XT
Attenuator	Set Attenuator

Hold time	Set Hold Time
Location information	Set Location Info

Lockout	Set Lockout

Modulation	Set Modulation

Startup key	Set Startup Key

Available operations
Delete a site	Delete Site

Create at least 1 frequency in each site

Each trunked system can contain up to 30 frequencies in each site, and all sites must contain at least 1 frequency.

1.On the Edit Site menu, select the site you just created.

2.Go to the Set Frequencies sub-menu and select New Frequency.

3.Enter at least 1 frequency for this site.

4.When you enter a new frequency, the scanner will prompt you for the logical channel number or LCN for that frequency. Enter a number from 1 through 30.

5.If you need to change any of the frequency properties, you can do that now. Unless a property is Required, you can operate the system without changing the default settings.

Frequency properties

All of these options can be found by selecting the frequency under the Set Frequencies sub-menu. If necessary, the sub-menu and option name on each scanner are listed beside the property.

Property

Option name

Required

Logical channel number		Input LCN
Recommended
None
Optional
Lockout		Set Lockout
Available operations
Delete a frequency		Delete Frequency

		30

Image 44

Uniden UBCD396XT owner manual Create at least 1 frequency in each site, Frequency properties

Contents

UBCD396XT Page Table of Contents UBCD396XT UBCD396XT Using Quick KEYS, Startup KEYS, and Search Keys 105 UBCD396XT Vii Viii 149 163 167 Xii General Precautions Power Disconnection CautionEarphone Warning Liquid Exposure Warning Setting up the hardware Whats included inside the box? Install the batteries Connect the antenna Attach the belt clip To remove the belt clip Connecting a GPS receiver Configuring your scannerConnecting the receiver Compatible GPS receivers Troubleshooting Using Preloaded Systems Preloaded Systems Scan mode Search modeHold mode Close Call Priority mode Close Call Only mode Close Call Do Not Disturb modePriority Scan mode Function + tap no Priority Plus Scan mode GPS modeTone Out mode Band Scope mode Keys and their functions Key Overview Key functions in different operation modes Using the Function buttonOperating the controls Locking the Keypad Main menu Using the menuMenu tree Reading the display Handheld models only As a voice channel, but the scanner is WFM System number line Sx Special displays Conventional Systems Programming a Conventional SystemCreate a system System properties Create at least 1 channel in each group Create at least 1 channel groupChannel group properties NAC UBCD396XT UBCD396XT Operations Edacs Scat SystemsProgramming an Edacs Scat System Create at least 1 frequency Create a siteSite properties Frequency properties UBCD396XT Number tag Edacs Trunked SystemsProgramming an Edacs System Create at least 1 site Create at least 1 frequency in each site Programming a system for Scanning Channel properties UBCD396XT UBCD396XT UBCD396XT LTR Trunked Systems Programming an LTR System Create at least 1 site Set Lockout Create a channel group Create a channel in each group Channel properties UBCD396XT Systems only Motorola Trunked SystemsProgramming a Motorola System Attenuator ID formatStatus bit Hold time Available Create a channel Tgid Edit Tgid UBCD396XT UBCD396XT UBCD396XT Preset Fleet Maps Motorola fleet mapsCustom Fleet Maps Number Ending How Fleet Maps WorkBlocks Size Codes Size Standard P25 Trunked Systems Programming a P25 System Edit Band Plan Programming a system for Scanning Create a channel in a group Edit Name UBCD396XT Single-Frequency P25 Trunked Systems Programming a Single-Frequency P25 System Create exactly 1 site Create a channel group Tgid Edit Tgid Trunked radio systems Radio Systems OverviewConventional radio systems Trunked system basics System ControllerVoice Frequency Pool Talk Group IDs Real life example Deciphering Trunked Systems Before you program a trunked system Edacs Systems Conventional SystemsNon-scannable Systems System Voice System Frequencies Talk Group IDs Channels Location-based Scanning Geopolitical Approach UBCD396XT UBCD396XT Antenna-Centric Approach Combining for Efficiency See Also Assigning an SNT Number TagsProgramming Number Tags To a custom search range Assigning a Chnt Using Number Tags Quick Keys Programming Quick KeysAssigning an SQK To a conventional system Using Quick Keys Assigning a GQK To use a GQK To use SQK 0 throughTo use SQK 10 through Programming Search Keys Using Search KeysSearch Keys Programming locations Programming a location for a siteProgramming a location for a channel group Programming general locations ∙ roads Dangerous Road To create a new location For Dangerous Xing and Dangerous Roads only Edit an existing location Setting alerts To sound an alert when Follow these steps Choose the Alert Tone and Alert Light you Using Quick Keys, Startup Keys, and Search Keys Quick KeysStartup Keys Search Keys Using Tone-Out Mode Tone Out modeConfiguring Tone Out channels Key operation in Tone Out Mode GPS Close Call mode Key operation in Close Call Only mode Quick Search Intermediate Screen enter Frequency Band Scope mode To turn on Band Scope mode Key operation in Band Scope mode Change Switch LCD You must have a compatible GPS receiver connected GPS modeSee Also Reading the display in GPS mode Main GPS display Location alert display Location review display Key operation in GPS mode Exchange Offset Mode2nd Action on Attenuation Freq Modulation Priority LCD Program System Edit NameEdit Sys Option Edit Site Edit Group Copy SystemDelete System New System Conventional system options Edit Sys OptionGlobal system options Set Startup Key Set LockoutSet Hold Time P25 Waiting Time Trunked system options ID Scan/SearchPriority ID Scan Emergency Alert Motorola system options P25 System options P25 NAC Option Edit Group Options available for all groupsEdit Name Edit Channel Delete Group New Group Set GPS Enable Set LocationInfoSet Latitude and Set Longitude Set Range 115 Set Audio Type Edit ChannelEdit Frequency conventional systems Set Modulation Set AttenuatorSet Priority Set Alert Analog channel options Digital channel options Set Lockout Edit Site Options available for all sites Set Frequencies Auto Options available for Motorola systems Options available for P25 systemsDelete Site New Site Set Site Type Volume Offset Edacs Scat OnlyOptions available for Edacs systems Set Frequencies LTR and Edacs system optionsEdit Frequency Delete Frequency Edacs Scat system options LCN Logical Channel Number Scan mode Default Scan ModeScanning vs. Searching Scanning trunked systems Special keys Key operation in Scan modeLocked Items Scan Search Volume Display Exchange Keypad controls Reverse Modulation Backlight No Decimal Yes Enter Key operation in Search mode Reverse Attenuation Freq Modulation Message Assigned to this Frequency Cancel Hold mode Key operation in Hold mode Frequency into Reading the displays in Hold mode Conventional system display Trunked system display Service search with scan hold display Edit Talk Group ID Motorola Type I SystemsMotorola Type II Systems P25 Single Frequency Systems or Standard System Trunk Site Call channel Motorola, P25 or Edacs LTR systems Edit Band Plan Creating a custom band plan Calculating upper base frequencies For sites with a single band planFor sites with multiple band plans Custom Frequency Table 156.240 MHz 162.045 MHz Close Call Close Call OnlyCC Auto Store Hits with Scan Set CC Alert Set CC ModeSet CC Override Band Frequencies Set CC BandsSet Alert Tone Set Alert Light Set CC Pause 800 MHz Set Interval Priority ScanPriority Scan menu MaxCHs/Pri-Scan Set Alert Tone Program LocationSet Type Set Location Info Set Range New Location Set Alert VolumeDelete Location Set Heading Set Speed Limit Create a new location Search and Store Search for Service SearchEdit Service Custom Search Edit CustomSearch with Scan Edit Srch Limit Set Step Set C-Ch Only Search and Store Set MOT Band Plan Set Search Key Search with Scan Set Alert Tone Alert Broadcast Screen Srch/CloCall OptFreq Lockouts Set Delay Time Tone/Code SearchRepeater Find Max Auto Store P25 Waiting Time Set AttenuatorSet Audio AGC Startup Keys Assigning Startup Keys Using Startup Keys Assigned Startup State Key Locked None Unlocked Unlocked no change Locked no change Tone a and Tone B Settings Tone B Setting 171 Tone-Out Standby Tone-Out SetupTone-Out for Tone-Out Search Set Alert Tone Set Alert Light Set Audio AGC Key Safe Mode To turn Key Safe mode on or off Modes, this key is Disabled. Search mode, this Normal operation Disabled Settings Adjust Key BeepBattery Option Set Backlight Set Charge Time Adjust Audio AGCAdjust Contrast Set Serial Port Set C-CH OutputSet GPS Format Display Unit ID Band DefaultsP25 LP Filter Firmware Version See Scanner InfoMemory Used Wired Clone Sensitivity nominal 12dB Sinad UBCD396XT SpecificationsGeneral Nominal Signal Noise Ratio nominalClose Call Sensitivity Frequency Range Special FunctionsSupported trunking systems Band Scope Function Dynamic memory allocation capacity Heterodyne SystemCtcss and DCS Tones Ctcss Tone Frequencies 50 frequencies total Hz 187 Warranty Procedure for obtaining warranty service