Uniden UBCD396XT owner manual Program System, Edit Name, Edit Sys Option, Edit Site

UBCD396XT

30.Program System

The Program System menu lets you create systems and edit existing systems. All existing systems are listed in the order they were created: select the system you want to edit, or select New System to create a new one.

When you create a new system, the scanner prompts you to select a system type; the system type you select controls what options are available for the system setup. You can't change a system type once the system is created: if you need to change the system type, delete the system and create it all over again as a new system.

The System Type options are:

∙P25 : Use for any P25 system. When you select this system type, the scanner prompts you to choose Standard Trunk or One-Freq .

∙MOT : Use for any Motorola system.

∙EDCS : Use for any EDACs system. When you select this system type, the scanner prompts you to choose WIDE/NARROW or SCAT .

∙LT : Use for any LTR system.

∙Conventional : Use for any non-trunked system.

REMEMBER: Once you select a system type, you can't change it!

Edit Name

Enter a name or edit the existing one. Names can be 16 characters long, and they can contain upper and lower case letters, punctuation, and spaces. Turn the SELECTVOLUME-SQUELCHknob on the handheld scanners or the SCROLL

/FUNCTION knob on mobile scanners to choose the character you want, then press 6 (right cursor) to move the cursor to the next character.

Edit Sys Option

This menu lets you set the options for each system.

Edit Site

(trunked systems only) This menu lets you create sites and edit existing sites. All existing sites are listed in the order they were created: select the site you want to edit, or select New Site to create a new one.

105