UBCD396XT
11.EDACS Trunked Systems
Please note that these pages are meant as general instructions.
This section deals with EDACS Wide or standard systems. This includes EDACS systems that use ESK.
No special setting is needed to enable ESK tracking on an EDACS system. Note that the scanner cannot decode EDACS ProVoice.
Programming an EDACS System
To program an EDACS system, you'll need to program the required elements in following order:
Create a system
1.Go to the Program System menu and choose New System.
2.The scanner will prompt you for the System Type. Select EDCS.
3.The scanner will prompt you for the
4.When the scanner prompts you confirm, tap YES.
5.The scanner creates the system with a default name. Select Edit Name if you want to change it.
6.If you need to change any of the system properties, you can do that now. Unless a property is Required, you can operate the system without changing the default settings.
System properties
All of these options can be found under your scanner's Program System menu. If necessary, the submenu and option name on each scanner are listed beside the property.
Property |
| Option name |
|
|
|
| Required | |
None |
|
|
| Recommended | |
Name |
| Edit Name |
|
|
|
Number tag |
| Set Number Tag |
|
|
|
| Optional | |
|
|
|
28
