UBCD396XT
21.Quick Keys
∙Quick Keys let you enable or disable systems and channel groups during a scan. Disabled systems and channel groups are ignored during scans.
∙You can assign Quick Keys at the system/site level (System/site Quick Key or SQK), at the channel group level (Group Quick Key, or GQK), or at both levels.
∙You can assign an SQK to the temporary system Close Call Hits that is created during Close Call searches. This system and its SQK operate like any other system.
∙You can assign Quick Keys to service searches and custom search ranges. These search Quick Keys operate like regular SQKs.
Programming Quick Keys
Assigning an SQK
∙Multiple systems, sites, and search ranges can share the same SQK.
∙All systems and sites assigned to the same SQK will be enabled (or disabled) when you enter the Quick Key.
∙SQKs range from 0 to 99.
To a conventional system:
1.Open the Program System menu.
2.Select the system you want to assign the Quick Key to.
3.Select Edit Sys Option, then select Set Quick Key.
4.Enter the Quick Key you want to use for this system.
To a trunked system:
1.Open the Program System menu.
2.Select the system you want to assign the Quick Key to.
3.Select Edit Site, then select the site you want.
4.Select Set Quick Key, then enter the Quick Key you want to use for this site.
To the Close Call Hits system :
1.Open the Close Call menu.
2.Select Hits with Scan, then select Set Quick Key to.
3.Enter the Quick Key you want to use for the Close Call Hits system.
79
