Uniden UBCD396XT owner manual Programming a system for Scanning

UBCD396XT

2.Go to the Set Frequencies sub-menu and select New Frequency.

3.Enter at least 1 frequency for this site.

4.If you need to change any of the frequency properties, you can do that now. Unless a property is Required, you can operate the system without changing the default settings.

Frequency properties

All of these options can be found by selecting the frequency under the Set Frequencies sub-menu. If necessary, the sub-menu and option name on each scanner are listed beside the property.

Property		Option Name
	Required

None

Recommended

None

Optional

Lockout

Set Lockout

Available operations

Delete a frequency

Delete Frequency

Programming a system for Scanning

Once you create the system and at least 1 site, you can Search the system with no problems. However, if you want to Scan the system, you'll need to program the required elements in following order.

Create a channel group

Each P25 system can contain up to 20 channel groups.

1.On the Program System menu, select the system you just created.

2.Go to the Edit Group menu and select New Group .

3.If you need to change any of the channel group properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings.

Channel group properties

55