UBCD396XT
| being scanned blinks. |
| In Hold mode: This line displays the GQK |
| number of the current group only. |
| In Custom Search mode: The numbers of any |
| programmed search ranges are display on this |
| line. The number of the custom range that is |
| currently being searched blinks. |
Hold icon | The scanner is in Hold mode. |
IFX icon | You switched to the intermediate frequency |
| (IF exchange). |
Keypad lock (or GPS) | : The keypad is locked. (Available only |
Icon | on handheld models.) |
| GPS: The scanner is receiving data from the |
| GPS device. |
Lockout icon | The current channel is locked out. |
Modulation icon | This icon displays the modulation type of the |
| current channel: AM, FM, NFM, FMB, or |
| WFM. |
Priority icon | The current channel is set as a priority |
| channel. |
Priority scan icon (PRI) | Steady: Priority scan is turned on. |
| Blinking: Priority Plus scan is turned on. |
REP icon | The Repeater Find feature is turned on. |
Signal level icon | This icon displays the strength of the current |
| signal; the icon ranges from zero bars (no |
| signal) to five bars (strong signal). |
System number line (Sx:) | In Scan mode: The system/site Quick Key |
| numbers (SQK) of any unlocked systems or |
| sites are displayed on this line. The SQK |
| number of the system or site that is currently |
| being scanned blinks. For SQK numbers |
| above 9, the tens digit replaces the X in the |
| icon; the ones digits are shown on this line. |
|
|
| In Hold mode: This line displays the SQK |
| number of the current system or site only. For |
| SQK numbers above 9, the tens digit replaces |
| the X in the icon; the ones digit is displayed on |
| this line. |
|
|
| In Service Search mode: The icon SCR |
| replaces the System numbers if the broadcast |
| screen feature is turned on. |
|
|
17
