UBCD396XT
2.Select Edit Service, then select the service search range you want to assign the Startup Key to.
3.Select Search with Scan, then select Set Startup Key.
4.Enter the Startup Key you want to use for this search range.
To a custom search range :
1.Open the Search for... menu.
2.Select Edit Custom, then select the custom search range you want to assign the Startup Key to.
3.Select Search with Scan, then select Set Startup Key.
4.Enter the Startup Key you want to use for this custom search range.
Using Startup Keys
To activate a Startup Key:
1.Turn the scanner off.
2.Press & hold the number key that corresponds to the Startup Key while you power the scanner on. (e.g. To activate Startup Key configuration # 2, press & hold 2 on the number pad while turning the scanner on.)
3.Continue holding the number key until the scanner display shows the number of the Startup Key configuration (In the example above, the display shows Startup Config. Key No. 2 ).
For example, say you have 4 systems programmed according to the table below:
| Assigned Startup |
| State |
|
| Key |
|
| |
|
|
|
| |
| 3 |
| Locked |
|
|
|
|
|
|
| None (.) |
| Unlocked |
|
| None (.) |
| Locked |
|
| 9 |
| Unlocked |
|
|
|
|
|
|
Here is the result if you power on the scanner while you press and hold 3 :
| Assigned Startup |
|
| Previous state |
|
| Resulting state |
|
| Key |
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| 3 |
|
| Locked |
|
| Unlocked |
|
| None (.) |
|
| Unlocked |
|
| Unlocked (no change) |
|
|
|
|
|
|
|
|
|
|
168
