Uniden UBCD396XT owner manual Tone-Out for, Tone-Out Standby, Tone-Out Setup

UBCD396XT

52.Tone-Out for...

Tone-Out Standby

Check the tone out channels for paging tones, according to each channel's individual settings.

Tone-Out Setup

This menu lets you configure the 10 tone-out channels. Select the channel you want to edit from the list, then set the frequency, tone, and other options for that channel.

Edit Name

Enter a name or edit the existing one. Names can be 16 characters long, and they can contain upper and lower case letters, punctuation, and spaces. Turn the SELECTVOLUME-SQUELCHknob on the handheld scanners to choose the character you want, then press 6 (right cursor) to move the cursor to the next character.

Set Frequencies

Use this menu to program frequencies for this Tone Out channel.

Set Tone

This menu lets you configure the type of tone out search. Select the tone you want to edit (Edit Tone A or Edit Tone B ), then set the frequency for that tone. Enter a frequency between 250 Hz and 3500 Hz, or set the frequency to 0 Hz. (See Tone A and Tone B Settings for more information.)

Set Delay Time

Set the number of seconds the scanner should wait after a transmission stops before moving on to the next channel. Select 0, 1, 2 (default), 5, 10, or 30 seconds . To have the scanner wait for your input before moving on to the next channel, select Infinite .

Set Alert

172