UBCD396XT
Once you create the system and at least 1 site, you can scan the system in ID Search mode. In this mode, the scanner stops on all system traffic for talk groups you have not locked out. If you want to use ID Scan mode, you'll need to program channels into the system. In ID Scan, the scanner only stops on talk groups you have programmed into a channel.
Create a channel group
Each Motorola system can contain up to 20 channel groups.
1.On the Program System menu, select the system you just created.
2.Go to the Edit Group menu and select New Group.
3.If you need to change any of the channel group properties, you can do that now. Unless a property is Required, you can operate the system without changing the default settings.
Channel group properties
(All of these options can be found by selecting the group name under the Edit Group menu. If necessary, the
| Required |
|
| None |
|
|
|
|
|
| Recommended |
|
| Name (Edit Name) |
|
|
|
| |
|
|
| Quick key (Set Quick Key) | |
|
|
|
| |
| Optional |
|
| Location information (Set LocationInfo) |
|
|
|
| |
|
|
| Lockout (Set Lockout) | |
|
|
|
| |
| Available |
| Delete Group | |
| operations |
| ||
|
|
| ||
|
|
|
|
|
Create a channel
Each trunked system can contain up to 500 channels.
1.On the Edit Group menu, select the channel group you just created.
2.Go to the Edit Channel menu and select New Channel.
3.Input the Talk Group ID (TGID) for this channel.
4.If you need to change any of the channel properties, you can do that now. Unless a property is Required, you can operate the system without changing the default settings.
45