Analog channel options | Uniden UBCD396XT specification

UBCD396XT

Volume Offset

The scanner can automatically adjust the volume when it tunes to this channel or frequency. Enter one of the following options:

Softer	No Change	Louder

-3, -2, -1	0 (default)	+1, +2, +3

Copy Channel

Copy this channel and all its settings into the buffer. When a channel is stored in the buffer, the scanner adds Paste Channel to the bottom of the Program Channel menu whenever you are editing a compatible system (that is, a system that is the same type as the one you copied the channel from).

Delete Channel

Delete this frequency or channel and all associated settings.

New Channel

Create a new channel.

Analog channel options

The following options are available only when the Audio Type is set to Analog .

Set CTCSS/DCS

(Conventional systems only) Choose one of the following CTCSS/DCS options for this channel:

Off Search

CTCSS

DCS

The scanner ignores all CTCSS and DCS tones and opens squelch on any signal.

The scanner displays any received CTCSS and DCS tones, but it opens squelch on any signal.

The scanner prompts you to enter a CTCSS code; it will only open squelch if the received signal contains a CTCSS tone that matches the one you enter here.

The scanner prompts you to enter a DCS code; it will only open

118

Image 132

Uniden UBCD396XT owner manual Analog channel options

Contents

UBCD396XT Page Table of Contents UBCD396XT UBCD396XT Using Quick KEYS, Startup KEYS, and Search Keys 105 UBCD396XT Vii Viii 149 163 167 Xii General Precautions Power Disconnection CautionEarphone Warning Liquid Exposure Warning Setting up the hardware Whats included inside the box? Install the batteries Connect the antenna Attach the belt clip To remove the belt clip Connecting a GPS receiver Configuring your scannerConnecting the receiver Compatible GPS receivers Troubleshooting Using Preloaded Systems Preloaded Systems Scan mode Search modeHold mode Close Call Priority mode Close Call Only mode Close Call Do Not Disturb modePriority Scan mode Function + tap no Priority Plus Scan mode GPS modeTone Out mode Band Scope mode Keys and their functions Key Overview Using the Function button Operating the controlsKey functions in different operation modes Locking the Keypad Using the menu Menu treeMain menu Reading the display Handheld models only As a voice channel, but the scanner is WFM System number line Sx Special displays Conventional Systems Programming a Conventional SystemCreate a system System properties Create at least 1 channel group Channel group propertiesCreate at least 1 channel in each group NAC UBCD396XT UBCD396XT Edacs Scat Systems Programming an Edacs Scat SystemOperations Create a site Site propertiesCreate at least 1 frequency Frequency properties UBCD396XT Edacs Trunked Systems Programming an Edacs SystemNumber tag Create at least 1 site Create at least 1 frequency in each site Programming a system for Scanning Channel properties UBCD396XT UBCD396XT UBCD396XT LTR Trunked Systems Programming an LTR System Create at least 1 site Set Lockout Create a channel group Create a channel in each group Channel properties UBCD396XT Motorola Trunked Systems Programming a Motorola SystemSystems only ID format Status bitAttenuator Hold time Available Create a channel Tgid Edit Tgid UBCD396XT UBCD396XT UBCD396XT Preset Fleet Maps Motorola fleet mapsCustom Fleet Maps Number How Fleet Maps Work BlocksEnding Size Codes Size Standard P25 Trunked Systems Programming a P25 System Edit Band Plan Programming a system for Scanning Create a channel in a group Edit Name UBCD396XT Single-Frequency P25 Trunked Systems Programming a Single-Frequency P25 System Create exactly 1 site Create a channel group Tgid Edit Tgid Radio Systems Overview Conventional radio systemsTrunked radio systems Trunked system basics System ControllerVoice Frequency Pool Talk Group IDs Real life example Deciphering Trunked Systems Before you program a trunked system Edacs Systems Conventional SystemsNon-scannable Systems System Voice System Frequencies Talk Group IDs Channels Location-based Scanning Geopolitical Approach UBCD396XT UBCD396XT Antenna-Centric Approach Combining for Efficiency See Also Number Tags Programming Number TagsAssigning an SNT To a custom search range Assigning a Chnt Using Number Tags Quick Keys Programming Quick KeysAssigning an SQK To a conventional system Using Quick Keys Assigning a GQK To use SQK 0 through To use SQK 10 throughTo use a GQK Using Search Keys Search KeysProgramming Search Keys Programming locations Programming a location for a siteProgramming a location for a channel group Programming general locations ∙ roads Dangerous Road To create a new location For Dangerous Xing and Dangerous Roads only Edit an existing location Setting alerts To sound an alert when Follow these steps Choose the Alert Tone and Alert Light you Using Quick Keys, Startup Keys, and Search Keys Quick KeysStartup Keys Search Keys Tone Out mode Configuring Tone Out channelsUsing Tone-Out Mode Key operation in Tone Out Mode GPS Close Call mode Key operation in Close Call Only mode Quick Search Intermediate Screen enter Frequency Band Scope mode To turn on Band Scope mode Key operation in Band Scope mode Change Switch LCD GPS mode See AlsoYou must have a compatible GPS receiver connected Reading the display in GPS mode Main GPS display Location alert display Location review display Key operation in GPS mode Exchange Offset Mode2nd Action on Attenuation Freq Modulation Priority LCD Program System Edit NameEdit Sys Option Edit Site Edit Group Copy SystemDelete System New System Edit Sys Option Global system optionsConventional system options Set Startup Key Set LockoutSet Hold Time P25 Waiting Time Trunked system options ID Scan/SearchPriority ID Scan Emergency Alert Motorola system options P25 System options P25 NAC Option Edit Group Options available for all groupsEdit Name Edit Channel Delete Group New Group Set GPS Enable Set LocationInfoSet Latitude and Set Longitude Set Range 115 Edit Channel Edit Frequency conventional systemsSet Audio Type Set Modulation Set AttenuatorSet Priority Set Alert Analog channel options Digital channel options Set Lockout Edit Site Options available for all sites Set Frequencies Auto Options available for Motorola systems Options available for P25 systemsDelete Site New Site Volume Offset Edacs Scat Only Options available for Edacs systemsSet Site Type Set Frequencies LTR and Edacs system optionsEdit Frequency Delete Frequency Edacs Scat system options LCN Logical Channel Number Scan mode Default Scan ModeScanning vs. Searching Scanning trunked systems Key operation in Scan mode Locked ItemsSpecial keys Scan Search Volume Display Exchange Keypad controls Reverse Modulation Backlight No Decimal Yes Enter Key operation in Search mode Reverse Attenuation Freq Modulation Message Assigned to this Frequency Cancel Hold mode Key operation in Hold mode Frequency into Reading the displays in Hold mode Conventional system display Trunked system display Service search with scan hold display Edit Talk Group ID Motorola Type I SystemsMotorola Type II Systems P25 Single Frequency Systems or Standard System Trunk Site Call channel Motorola, P25 or Edacs LTR systems Edit Band Plan Creating a custom band plan Calculating upper base frequencies For sites with a single band planFor sites with multiple band plans Custom Frequency Table 156.240 MHz 162.045 MHz Close Call Close Call OnlyCC Auto Store Hits with Scan Set CC Mode Set CC OverrideSet CC Alert Set CC Bands Set Alert Tone Set Alert Light Set CC PauseBand Frequencies 800 MHz Priority Scan Priority Scan menuSet Interval MaxCHs/Pri-Scan Program Location Set TypeSet Alert Tone Set Location Info Set Range Set Alert Volume Delete LocationNew Location Set Heading Set Speed Limit Create a new location Search and Store Service Search Edit ServiceSearch for Custom Search Edit CustomSearch with Scan Edit Srch Limit Set Step Set C-Ch Only Search and Store Set MOT Band Plan Set Search Key Search with Scan Set Alert Tone Alert Srch/CloCall Opt Freq LockoutsBroadcast Screen Set Delay Time Tone/Code SearchRepeater Find Max Auto Store Set Attenuator Set Audio AGCP25 Waiting Time Startup Keys Assigning Startup Keys Using Startup Keys Assigned Startup State Key Locked None Unlocked Unlocked no change Locked no change Tone a and Tone B Settings Tone B Setting 171 Tone-Out Setup Tone-Out forTone-Out Standby Tone-Out Search Set Alert Tone Set Alert Light Set Audio AGC Key Safe Mode To turn Key Safe mode on or off Modes, this key is Disabled. Search mode, this Normal operation Disabled Settings Adjust Key BeepBattery Option Set Backlight Adjust Audio AGC Adjust ContrastSet Charge Time Set C-CH Output Set GPS FormatSet Serial Port Band Defaults P25 LP FilterDisplay Unit ID See Scanner Info Memory UsedFirmware Version Wired Clone UBCD396XT Specifications GeneralSensitivity nominal 12dB Sinad Signal Noise Ratio nominal Close Call SensitivityNominal Frequency Range Special FunctionsSupported trunking systems Band Scope Function Dynamic memory allocation capacity Heterodyne SystemCtcss and DCS Tones Ctcss Tone Frequencies 50 frequencies total Hz 187 Warranty Procedure for obtaining warranty service