UBCD396XT
42.Close Call
The Close Call (CC) feature searches for signals that are stronger than other signals on the band (indicating the transmitter is probably somewhere close by). This menu lets you change the operation settings of the close call feature; you can change the overall close call options through the Srch/CloCall Opt menu.
Close Call Only
Search the selected bands for close call hits; the scanner stops all other scanning for a close call only search.
CC Auto Store
Start a close call search. When a close call hit is detected, the scanner stores that frequency in the system named Close Call in the Found Channels group. The scanner saves found channels until it reaches the number set in the Max Auto Store setting on the Srch/CloCall Opt menu.
Hits with Scan
The scanner stores the 10 most recent close call hits to a temporary system; you can set the options for this temporary system, just like you can for permanent systems. The scanner deletes the 10 saved frequencies in this temporary system when you turn the power off. If you want to save the any of these frequencies permanently, you need to store them to a programmed system or use the CC Auto Store feature.
Set Quick Key
Assign this close call hits system to a Quick Key so you can easily enable or disable it during scanning. Enter a number from 0 to 99; tap NO (the decimal point) if you don't want to assign this system or site to a Quick Key. (For more information, see Quick Keys.)
Set Number Tag
Assign a number to this system you can use to tune directly to the system. Choose a number from 0 to 999. (For more information, see Number Tags.) Note that you can only set a system number tag for the Close Call system.
145
