Uniden UBCD396XT owner manual Programming a system for Scanning, Create at least 1 channel group

UBCD396XT

Programming a system for Scanning

Once you create the system and at least 1 site, you can Search the system with no problems. However, if you want to Scan the system, you'll need to program the required elements in following order:

Create at least 1 channel group

Each EDACS system can contain up to 20 channel groups, and any system you want to scan must contain at least 1 channel group.

1.On the Program System menu, select the system you just created.

2.Go to the Edit Group menu and select New Group.

3.If you need to change any of the channel group properties, you can do that now. Unless a property is Required, you can operate the system without changing the default settings.

Channel group properties

All of these options can be found by selecting the group name under your scanner's Edit Group menu. If necessary, the sub-menu and option name on each scanner are listed beside the property.

Property		Option name
	Required
None
Recommended
Name		Edit Name
Quick key		Set Quick Key
	Optional
Location information		Set Location Info
Lockout		Set Lockout
Available operations
Delete a group		Delete Group

Create at least 1 channel in each group

Each trunked system can contain up to 500 channels.

31