Uniden UBCD396XT owner manual Edacs Scat Systems, Programming an Edacs Scat System, Operations

UBCD396XT

10.EDACS SCAT Systems

Please note that these pages are meant as general instructions. While most of the information here applies to all scanners, some options may not be available on certain scanner models. Model-specific options are indicated in the text.

Programming an EDACS SCAT System

To program an EDACS SCAT system, you'll need to program the required elements in following order:

Create a system

1.Go to the Program System menu and choose New System.

2.The scanner will prompt you for the System Type. Select EDCS.

3.The scanner will prompt you for the sub-type. Select SCAT.

4.When the scanner prompts you confirm, tap YES.

5.The scanner creates the system with a default name. Select Edit Name if you want to change it.

6.If you need to change any of the system properties, you can do that now. Unless a property is Required, you can operate the system without changing the default settings.

System properties

All of these options can be found under your scanner's Program System menu. If necessary, the sub-menu and option name on each scanner are listed beside the property.

Property		Option name
	Required

None

Recommended

Name

Number tag

Edit Name

Set Number Tag

Optional
Automatic Gain Control		Set Audio AGC
(AGC)
Delay time		Set Delay Time
Available	operations
Copy a system		Copy System
Delete a system		Delete System
		24